In addition to looking at equipment, we also have to look at the quality of service provided by manufacturers. The gap between the quality of service provided by different manufacturers can be great. In terms of quality, we need to look at the most standards. Only high-quality products can gain a firm footing.
When we examine the strength of manufacturers, we must look at a few more companies and compare the best.

the final value of the digital printing machine is green and pollution-free. The principle of the digital printing machine is to use computer control, and then directly through the machine to spray ink on the fabric, on-demand inkjet printing in the production process, that is, how much ink will be needed to print this pattern will be how much ink will be sprayed, will not Multi-spray, the waste generated is at most the remaining ink on the nozzle

The sports cold towel is made of foreign core technology and technology, and has a special structure of “moisture absorption, circulation, evaporation”. It is a functional fabric that can be recycled. Only water (irrespective of cold or hot water) can instantly Cold cooling, with long and continuous cold feeling, the cold towel can get the same ice sensation effect by touching the human skin sweat, physical cooling, no pollution, energy conservation, reusable.

Before the digital printing, it is necessary to print the test strip first, and it is possible to print the image without checking the disconnection. And every one hour of printing should re-test whether the test strip can be broken, if there is a need to clean the disconnection before they can continue to print the work.

After all, you have to have your own product to do business, don't do anything, and don't do anything well. You said that if someone else can make your product, you can't do it with someone else's product. You say someone will choose you? So what do you do to compete with others, then you will find out how important the core product is.

The digital printing machine is equipped with a sensor. The sensor detects the ink content of the ink cartridge. If the sensor detects that one ink color is less than the set value, it will prompt to change the ink. When prompted, we immediately removed the cartridge, reset the sensor, and finally installed a new cartridge. Remember to reset the sensor.

When we carry out digital printing, we must pay attention to reducing the need for use at any time and determine the best results. These need to be changed during the printing process. If it is a traditional printing, it will be more difficult to change, and the digital printing will be very simple and rapid.

Next week, our company will participate in the 13th Tokyo International Gift & Grocery Show in July 3rd - July 6th. You will also be welcome to watch our 4K cotton digital print on the spot.

Booth number: W04-53

We Busyman textiles are easy to use for small children and less energetic women. The most living kerchiefs are only 34cm*34cm in size, while maintaining a consistent infant-level testing standard, which is more suitable for women and children in terms of size and quality. It is not only convenient for daily use, but also for the use of the face, and it is more convenient to wring out after wet washing.

The selection criteria of equipment mainly depends on the level of configuration, size, and speed. Regardless of whether your plant is mass-produced or small-volume, the cost for digital printers is basically the same.

Digital printing is optimistic about the development prospects worldwide

Digital printing technology is still a new technology in development, and the upgrading of equipment and process materials is fast. The industrial digital equipment in the early stage was heavily invested, and the depreciation period of equipment was very short. The production enterprises only had to quickly absorb and absorb new technologies, improve production efficiency, reduce production costs。

Pour hot water into your washing machine, a glass of white vinegar, and a cup of baking soda, stir well.
Put the towel in and soak for 1 hour.
Add white vinegar and detergent again and start cleaning.

Time: July 4-6, 2018
Venue: Tokyo Ariake Exhibition Hall, Japan
Booth No.: W04-53 waiting for you

the ink used in digital printing machines need to be stored in a cool place, avoiding direct sunlight, causing ink agglomeration, sedimentation, volatilization, decomposition and so on. In addition, it is recommended that everyone use up after half an hour after the ink is opened. It is easy to open the seal for a long time because it is easy to break down due to the external environment.

Anyone who is engaged in the digital printing industry knows that the printing cost on light-colored cotton fabrics is almost the same as that of hand-printed printing. In black and red cotton fabrics such as black and red, it is not directly printed. It is necessary to print a base with white ink. Then print on a white background. If this is not the case, the color of the pattern will be light through the dark bottom.

If the pattern is suddenly changed, the manual printing needs to be modified, re-calibrated, etc. In short, it is not worthwhile, which is not a matter of time. However, digital direct-injection printing does not have these problems. The image resolution of pure cotton digital direct-injection printing machine is very high. In the process of printing processing, basically no color correction is needed. If the pattern is not satisfactory。

Xiaobian tells you that many digital printing customers now buy these records not only for wiping their faces, but also for wiping their faces. Many people print their favorite patterns in digital prints and collect them as a collection. Because the clarity of digital printing is really very high, and the color is beautiful, suitable for customers with high product requirements.

One of the processing of different fabrics is indeed the most needed for today's processing plants, and a comprehensive processing plant will be a guarantee of competitiveness. The quality of the products produced by different materials will be different, and all prices will be different.

With the advent of the industry 4.0 era, the digital printing processing industry has entered a period of full-speed acceleration. To this end, many digital printing manufacturers are conducting research and development. It is understood that there are many traditional hand-printed enterprises to transform digital printing, and many bosses directly jump to digital printing processing

The emergence of digital printing is very different from traditional printing, which effectively promotes the production mode and business model of the enterprise. The production process and efficiency of traditional printing are relatively low, and the cost of production is relatively high, coupled with the competition of the market. The profit obtained is very low, and now with the advent of digital printing, production methods and production efficiency are directly and tremendously changed.

1, the static is too high
2, the working voltage is too high
3. The positive and negative poles of the power supply are reversed.
4. Strong corrosive ink or other liquid gets on the circuit board of the nozzle

Just now the sizing still has many problems: the viscosity of the sizing is getting bigger and bigger, and finally the roller is glued to make the cloth produce plaque, which causes the color difference before and after. Because the drying temperature is high, the auxiliaries on the cloth will be destroyed, resulting in color. Not full and not beautiful. Therefore, we recommend that the pressure of the pressure roller should not be too large.

1. Look at the usage: There are not many users in the market, and the market is the best proof.
2, look at the professionalism of the manufacturer: Is there a special team to do this ink in this piece, the technical team is professional, in order to make a good product, the batch stability of the ink will be better, the color difference is stable.

Now, in the past few years, the country has promoted the concept of green environmental protection. Digital printing, with its green production process, has not only been supported by national policies, but also obtained The love of various companies, of course, has led to a surge in digital printing factories, but digital printing factories that can make high-end products still need to continue to work hard.

Regardless of the type of ink, the basic composition is a coloring agent, a dispersion medium (water, an organic solvent), an antibacterial agent, a pH adjuster, a humectant, etc., and a pigment type ink also has a dispersant, a binder, and the like.

At that time, because the technology was not perfect, the products printed by digital printing were not good in color fastness. After washing, it was very easy to fade. After a period of development, digital printing has slowly matured. The road is just printed on some fabrics, and the color fastness is still not perfect.

In addition, when looking for a digital printing factory, everyone also needs to see which printing method the factory uses. There are many kinds of printing methods. Each factory may have several printing methods, but it is impossible to print each. They are good at it, so be sure to know what the factory is best at, and then choose the printing method you need most according to your needs.

When digital printing is processed, it is necessary to check the quality. Now everyone should be able to see that the printing effect will be offset due to a little wrinkle in the printing process, which will lead to the shipment rate of the product. Greatly increased. Therefore, in order to obtain a high shipping rate, we must control it in terms of quality.

inspirational to do cotton digital printing leader

When it comes to digital printing, with the downward adjustment of the price range, some factories with poor strength have also closed down. Now through the market screening, the existing digital printing processing enterprises are increasingly achieving large-scale, standardized production and operation. The digital printing market has gradually stabilized and the future is promising.

With the development of the digital printing industry, the number of digital printing factories is also increasing. This actually indicates that the competition in the digital printing industry is becoming more and more fierce. If you want to stand out in the same industry and get better development, manufacturers will not be able to passively wait for customers to come to the door, and they must take the initiative to fight for customers.

A look: When choosing a cotton towel, look at the light to see if the color of the towel is even and soft. If the color is too bright, it is doped with polyester or other fibers.
Second touch: At the same time, feel the softness of the towel by hand. If it is uneven in hardness, hard, or hard, it is not pure cotton.

First of all, when we purchase a digital printing machine, we must start from the strength, brand, and customer reputation of the manufacturer, and then observe the parameters such as the stability and work efficiency of the equipment. In addition, we should also pay attention to the nozzle of the printing machine. We all know that white ink is very easy to precipitate, which causes the nozzle to block.

1, pearlescent, luminous printing
2, luminous printing
3, foam three-dimensional printing
4, capsule printing
5, matt printing (imitation jacquard printing)
6, gold and silver powder printing

Of course, from the perspective of consumers, the most concerned about the quality and use of products, but from the perspective of the entire industry chain, product differentiation is fundamental. How to increase added value? The first step is to solve the differentiated product. With differentiation, products have a market. To achieve the greatest degree of differentiation, we can be maximized.

For the production cost of digital printing machine, we must choose the products that we need to invest according to our own requirements. At the same time, because the nozzle damage is not repairable, we must budget our investment according to our actual situation. Do not buy at will.

the relevant printing media supplies must be stored in a dry environment, because the printing medium is easy to absorb moisture and damp, the wet medium is likely to cause the ink to spread and so on. Therefore, the material is put back into the original packaging when it is not used, and try not to touch the ground and the wall.

Nowadays, the digital printing technology is developing very fast and very fast. Compared with the traditional printing, the digital printing can make the color of the various fabric products more abundant and the color is more beautiful. Nowadays, the digital printing machine technology is also getting better and better, and it can also be processed quite delicately in production.

Nowadays, many digital printing factories actually have good capabilities, and the quality of the products is also very good, but they can't sell good prices. In fact, the big reason is that the products of the company are not favored by consumers. The company does not have a good-looking design of its own design, and it is not competitive in the market. So it is very important to have your own design capabilities.